MUAMA Sterilizer-X Product Information

How do I start using the Sterilize-x UV lamp?
1. Press and hold the power button for 3 seconds until the indicator light flashes blue. 2. The lamp will light up automatically after 30 seconds. You need ...
Tue, 17 Mar, 2020 at 4:37 PM
Does the lamp automatically turn off when the sterilization process is completed?
Yes, one sterilization cycle lasts 30 minutes, as soon as it is over, the lamp turns off automatically.
Tue, 17 Mar, 2020 at 4:37 PM
Does the Sterilize-x turn on after a delay?
Yes, once the power button is pressed and held for 3 seconds, the indicator light will flash blue. Afterwards the lamp will light up after 30 seconds. You n...
Tue, 17 Mar, 2020 at 4:37 PM
How do I safely use the UV lamp?
When Sterilize-X lamp is in use, no one should be present or look directly at the light source. This sterilization lamp turns on after a delay of 30 seconds...
Tue, 17 Mar, 2020 at 4:38 PM
I’m skeptical. Does germicidal UV really work?
UV sterilization was discovered in 1879 and sanitizing with UV-C light has been a normal practice since the mid-20th Century! In fact, the 1903 Nobel Prize...
Tue, 17 Mar, 2020 at 4:38 PM
How does UV lamp work to kill germs?
UV light is lethal to germs and bacteria, and their ability to reproduce. The Sterilize-X lamp works best within a 150 square foot radius and eliminates up ...
Tue, 17 Mar, 2020 at 4:38 PM
What are recommended products to sterilize?
It works great in the bathroom, kitchen, pet areas, baby nursery, in your car, or basically anywhere else! But before activating the light, the area must fi...
Tue, 17 Mar, 2020 at 4:39 PM
How long is one Sterilize-X cycle to eliminate up to 99.9% of bacteria & viruses?
One effective sterilization cycle lasts 30 minutes, afterwards, the device will turn off automatically.
Tue, 17 Mar, 2020 at 4:39 PM
What is the effective Sterilize-X working radius?
It has an effective range of about 12-15 feet in a 360° degree radius around it, and is thus most effective in areas that are less than 150 sq. ft.
Tue, 17 Mar, 2020 at 4:39 PM